# Imperial Materials: one whole day, two ways of being assessed

> Imperial Materials has no written test. Shortlisted applicants get a whole applicant day: 10.30 to 15.30, a 30 minute one-to-one and a 45 minute group task.

[Formatted version of this page](https://www.frontiervue.com/interviews/imperial-materials-science)

Materials Science and Engineering **requires no admissions test**: the course page states that “this department does not use a test as part of its selection process”. What takes its place is **a full applicant day**, on a Wednesday between November and March, running 10.30 to 15.30, which you are expected to attend in its entirety. It contains a one-to-one conversation, a group task, two talks and a student Q&A, so the unit of preparation is a day rather than a half hour. University-level questions, including who is invited, whether you attend online, and Imperial’s own tips, are answered on the [Imperial interviews overview](/interviews/imperial-college-london); this page is about the day itself.

## Key takeaways
- Prepare for a day, not an interview. You are there from 10.30 to 15.30, watched in two very different ways, and training one does not train the other.
- With no admissions test in play, the live evidence a lecturer gets about you is almost entirely what you say out loud in those 30 minutes and how you take a follow-up.
- The two talks and the 45 minute student Q&A are not a waiting room. The department says the interview is also for you to decide whether Imperial suits you, so your questions should grow out of what you hear that day.
- Five hours of continuous presence is a real constraint. Attention and energy need a plan, and since the course page does not mention lunch or breaks, planning for one unbroken stretch is safer.
- The published shortlist rule here is conditional: if your UCAS application indicates you are likely to satisfy the requirements, you are invited to an applicant day. No invitation rate is published, and the promise that predicted AAA guarantees an interview sits in the contextual admissions section of the Bioengineering page, for UK applicants on that route only; the Materials page carries no such line.

### The Materials applicant day at a glance

| Item | Value |
| --- | --- |
| Admissions test | None: the department “does not use a test” |
| Format | An applicant day, on Wednesdays between November and March |
| Length | 10.30 to 15.30, attendance expected the whole day |
| One-to-one | 30 minutes with a lecturer, aimed at being a conversation |
| Group task | 45 minutes of engineering problem-solving, watching teamwork |
| UCAS codes | Course JFM2, institution I50 |

> Imperial publishes no invitation rate for this department and no weighting for the interview or the group task in the offer decision. Any ratio, or any claim to hold what this department asks, that goes beyond the official pages is not usable information.

## Contents
1. The day, on the calendar and in the room
2. Thirty minutes and forty-five: two different ways of being watched
3. A department with no test, so speech is the evidence
4. The 30 minute one-to-one: rehearsing a conversation
5. The group task: the two hardest situations
6. Five hours: energy, pacing, and where questions come from
7. The numbers for the form, and what to carry into the day

## 1. The day, on the calendar and in the room

| Track | When | Detail |
| --- | --- | --- |
| Invitations as files are read | 2026-11-01 to 2027-02-28 (Usually November to February) | Imperial says interviews “usually take place between November and February”, and the department contacts you at the email address on your UCAS form. The course page states the shortlist rule as a single judgement: if your UCAS application indicates that you are likely to satisfy its requirements, you will be invited to an applicant day. |
| Applicant days | 2026-11-01 to 2027-03-31 (Wednesdays, November to March) | The official wording: applicant days are held on Wednesdays between November and March, run from 10.30 to 15.30, and you will be expected to attend the whole day. The department publishes no list of dates, no cohort size and no half-day option. Before any answering technique, this is what shapes your logistics: days of school missed, when you leave home, and when you next eat. |
| Equal-consideration deadline | 2027-01-13 (13 January, 18.00) | The course is submitted with UCAS code JFM2 and institution code I50, and the equal-consideration deadline for non-medicine courses is 18.00 UK time on 13 January 2027. It does not move anyone already invited to an applicant day, but it decides who else joins this round of reading. (hard deadline) |

> Dates and wording come from the course page plus Imperial’s interview and deadline pages, checked on 22 October 2026. Anything beyond the Wednesday pattern, including invitation rates and decision dates, is unpublished.

1. **Two talks, first** (Director, then Admission Tutor)
The course page says you hear from the Director of Undergraduate Studies and then the Admission Tutor, but publishes no topics for either talk. The job titles are the only steer: one covers how the degree is organised, the other admissions and what the department expects. Either way this is where your afternoon questions should come from, and one of Imperial’s own preparation tips is to think of questions you may want to ask.

2. **One-to-one interview** (30 minutes, one lecturer)
A one-to-one with one of the department’s lecturers. The department writes that it aims for the interview to be more of a conversation, and that its purpose is to see whether you are suitable for the course, as much as for you to decide if Imperial is the place for you. Two-way, not an interrogation.

3. **Group task** (45 minutes)
An engineering-based problem-solving challenge. Imperial states it is there to see your team working skills, because the department treats teamwork as an important part of life at Imperial. Success is not a correct answer produced alone.

4. **Student ambassador Q&A** (45 minutes)
A question-and-answer session with current student ambassadors. This is one of the few segments you can drive: specific questions get you something closer to a real week than any prospectus sentence.

Start from the fact applicants most often underestimate: **this is a whole day**. Five hours, from 10.30 to 15.30, containing two talks, a one-to-one, a group task and a student Q&A. The department publishes no running order or clock times for the three activity segments, and no cohort size, so the one thing you can plan is to treat the day as a single continuous performance rather than treating 30 minutes as “the interview” and the rest as waiting.

When we prepare a student for this day we work on three things that do not substitute for each other: turning the one-to-one into a conversation that survives follow-ups; turning the group task into turns you can take and hand back; and turning the two morning talks into questions you can actually ask. The first can be rehearsed alone. The second only happens in a room with other people. The third is a way of sitting and listening. A student who shines one-to-one can spend the entire group task unable to get a word in, and the reverse is equally common.

## 2. Thirty minutes and forty-five: two different ways of being watched

|  | One-to-one, 30 minutes | Group task, 45 minutes |
| --- | --- | --- |
| What is being observed | How one mind pushes an idea forward | Whether a group can push it forward together |
| Who holds the topic | The lecturer follows your answer | Whoever speaks, or nobody |
| How silence reads | Thinking before speaking is fine | Long silence looks like non-participation |
| What to rehearse | Speak an unfamiliar problem aloud and let someone interject | Two or three people, timed: take a turn, hand one over, wrap up |
| The usual failure | A memorised monologue that never hears the follow-up | Treating it as a solo solving display |

> This table is our own practice framework built from two sentences on the course page: the one-to-one aims to be more of a conversation, and the group task exists to see your team working skills. Imperial publishes no relative weighting, no marking scheme and no group size.

The two modes do not test the same capacity. The one-to-one tests **depth**: a question followed down four levels, and whether you are still thinking at the fourth. The group task tests **turns**: what you do while someone else holds the conversation, whether you politely contradict a wrong idea, whether you can call a wrap-up when the clock is nearly out.

Depth can be drilled alone: take an unfamiliar problem, speak it out loud, and have someone interject “why” at any sentence, then answer rather than repeat. Turns need other bodies. Three things are enough: one open engineering problem, someone keeping time, and a single sheet of paper shared between the group. In our sessions we run the second format deliberately, because it cannot happen in a bedroom. For the depth side, [thinking out loud in an interview](/interviews/guides/interview-thinking-aloud) covers the mechanics.

One difference gets missed: in the one-to-one the lecturer steers you back on track. In the group task nobody will. The same student on the same material can look strong in one segment and invisible in the other. That is not bad luck; the two segments are watching different things.

## 3. A department with no test, so speech is the evidence

The first sentence the course page offers about selection is negative: **“this department does not use a test as part of its selection process”**, and Imperial’s own list of admissions tests puts Materials in the no-test column. That is not the same as no selection. The same page says you are invited to an applicant day if your UCAS application indicates that you are likely to satisfy its requirements. The question is what does the indicating.

Applicants to tested departments arrive with a standardised script on top of their paperwork; applicants here do not have one. Almost all live evidence a lecturer gets about you comes from what you say in those 30 minutes, how you react when pushed back, and how you behave in the group task. The statement, the predicted grades and the referee’s report are all static; only the day is alive.

The neighbouring Bioengineering department, which also asks for no test, solves the same problem with an online interview instead, and its published assessment items are blunt: motivation and understanding of biomedical engineering as a career, potential for leadership and teamwork, your interests and the referee’s report. Different format, identical job: **when there is no test, the live day has to produce the evidence**. That is why this page puts nearly all of its weight on speaking practice.

> The line worth planning revision around is the published shortlist condition, which is conditional rather than courteous: **if your UCAS application indicates that you are likely to satisfy our requirements, you will be invited to an applicant day**. The same section says predicted grades matter but are not the only thing driving the decision, since selectors also read the personal statement and the reference. No invitation rate is published, and Materials states no guarantee of an interview keyed to predicted AAA: that promise sits in the contextual admissions section of the neighbouring Bioengineering page and covers only UK applicants on that route.

## 4. The 30 minute one-to-one: rehearsing a conversation

### 1. Turn motivation into an open question

“I have loved materials since I was small” does not survive one exchange in 30 minutes. In our sessions a student gives one line on the starting point, one on how far they pushed the reading themselves, and one on what they still do not understand. Motivation then becomes something that can be followed up: whichever line the lecturer picks up, there is material behind it. Cambridge’s interview preparation page points the same way, advising you to “practise talking about your subject with your friends, family or teachers”.

### 2. Rehearse being interrupted, not finishing

A conversation and a recital differ by their number of turns. We have the practice partner interject “why” or “what if it were brittle” at any sentence, under two rules: no repeating the previous line, and acknowledge the point before giving the next step. The department states its aim plainly, that the interview should be more of a conversation, and Cambridge says the people interviewing you are interested in how you work out your answers and how you think.

### 3. Bring three kinds of material: syllabus, extra, unknown

For the syllabus piece, pick one A-level topic from maths, chemistry or physics and go until you can sketch it on paper. For the extra piece, pick something you actually read and be able to name one thing you disagree with. The third is a boundary you declare yourself: a question you know you cannot answer yet, and can say precisely what is missing. We drill jumping between the three, not delivering them as three speeches. Cambridge suggests a practice interview with a teacher or someone who does not know you well, and that detail matters: people who know you do not push.

### 4. Keep two real questions for the end

The department writes the purpose of this interview as two-way: it is as much for you to decide if Imperial is the place for you. Reserve two questions that grew out of that morning’s talks (see part 6) rather than two the prospectus already answers. Cambridge’s preparation page is blunt about the rest: you can answer questions in your own way, and you do not need to say what you think the interviewers want to hear.

The six prompts below are **original practice questions written by us**, used in our own mock interviews, and they give the four moves above something to bite on.

1. “Why Materials Science and Engineering rather than chemical engineering or physics?”
2. “Your statement mentions a project you did. Which judgement in it now looks wrong to you?”
3. “Given a rubber tube and a copper tube, what simple experiment compares how they behave under repeated bending?”
4. “Why is a phone case usually polymer rather than metal? Name one cost of switching it to metal.”
5. “Explain why salt dissolves in water. Where would you start, and which step are you actually unsure of?”
6. “Has a story about materials made you stop recently? Tell us the part you did not understand.”

The drill is fixed: three minutes out loud per prompt, then listen back and check only two things, whether the first sentence contained a claim, and whether you changed material rather than repeating when pushed. For more targets, the [materials science question set](/interviews/questions/materials-science) and the [engineering question set](/interviews/questions/engineering) are labelled original practice throughout.

## 5. The group task: the two hardest situations

Officially the task is two things only: an engineering-based problem-solving challenge, used to see your team working skills. The problem itself, the group size, whether paper is provided, whether you report back to the room, and how the task weighs against the one-to-one are all unpublished. Anyone claiming to know what the department sets is inventing it.

What we do instead is nail the practisable part to the two situations that recur. First, **somebody dominates**. Do not fight for the floor: take their idea and add one condition to it, “that works if we assume this, and when does it stop working?” The turn becomes group property, and inside the same sentence you have moved from competitor to the person pushing it forward. Second, **nobody starts**. What is valuable here is not the right answer but a next step that takes 20 seconds: write the problem in the middle of the sheet, list three constraints, ask which one to fix first. That move is precisely what the department says it is looking for, because a group task was never a display of solo solving.

### Turning 45 minutes into a solo show

- Wrong: One person talks from start to finish and reaches the right answer

- Right: Hand the floor over every couple of minutes: I will stop there, does that work for you?

- How to spot it: Only your sheet has a conclusion written on it

### Speaking only when named

- Wrong: Waiting to be invited, agreeing throughout

- Right: Offer a workable next step regularly, even if it is only writing the constraints down

- How to spot it: Your entire contribution is yes, exactly, I agree

### Contradicting without replacing

- Wrong: Saying that will not work, then going quiet

- Right: That fails on a thin wall; what if we first assume the wall thickness stays fixed

- How to spot it: No new idea appears in the room after an objection

### No landing when the clock ends

- Wrong: Two minutes left and still arguing a third route

- Right: Drive the wrap-up: pick one option and name the two things still unresolved

- How to spot it: Nobody in the group has mentioned the time

## 6. Five hours: energy, pacing, and where questions come from

10.30 to 15.30 is one continuous stretch of attention, spent in a building you do not know among people you have never met. Most applicants’ checklists do not have this item, yet it is as plannable as any answer. The course page mentions no lunch or breaks, so we plan for one unbroken stretch and take the practical details from your own invitation.

Our method is to treat the day as three high-cost segments, the one-to-one, the group task and the Q&A, and to attach a 15-second action to each rather than a pep talk: before the interview, write your two questions in the corner of your paper; before the group task, uncap the pen and push the sheet to the middle; before the Q&A, find the one line you noted that morning. Three plain extras: get up at the hour the day requires; eat the breakfast you always eat, not a new one; bring water. Imperial also states there is no formal dress code and you should wear whatever makes you comfortable, which is attention you can spend on thinking instead.

**Three kinds of question worth asking**: Not on the website, answerable that day

- What a real week costs: Which week is heaviest, and in what
  - How people handle the weekend a lab report eats
  - Which course is hardest, and in which sense
- First-year hands-on work: Who does it, in groups of how many, and whether it counts
  - Anything you made yourself, or procedure only
- Switching direction in practice: Which modules get retaken after a move
  - Whether anyone around you actually did it

Those three kinds of question should not be invented at home. The two morning talks are exactly where they come from: the course page names the speakers, the Director of Undergraduate Studies and then the Admission Tutor, but publishes no topics, so a question has to grow out of what is actually said in the room. When we send a student into those talks they do one thing and write **three lines**: one on the concrete arrangement just described, one on the cost inside it that they most want to know, one on whether the question belongs to a lecturer or to a student. That third line routes it: structural doubts go to the end of the one-to-one, lived ones go to the 45 minute Q&A.

Do not plan to organise this on the fly; have paper and a pen. And do not treat the talks as the waiting room before the interview. Since the department frames the applicant day as a two-way judgement, your questions are part of the assessment rather than a courtesy.

## 7. The numbers for the form, and what to carry into the day

- **A-level minimum:** AAA: A in maths, A in chemistry or physics, A in a third subject
- **UCAS codes:** Course JFM2, institution I50
- **Deadline:** 13 January 2027, 18.00 UK time (The UCAS cut-off for non-medicine courses)
- **2027 home fee:** GBP 10,050 (A government-set cap, announced in November 2025)
- **ATAS:** Needed by some international applicants, code CAH10-03-02 (Whether it applies is decided by the official rules)
- **Applicant day:** Wednesdays between November and March, 10.30 to 15.30 (Attendance is expected the whole day)

What you carry into the day is short: **the invitation itself** (Imperial advises keeping it, because arrangements differ by department and you may need to check it), **paper and a pen**, **two questions that grew from that morning**, and **one subject question you cannot yet answer**. Among the university’s own tips is a plain one for an in-person occasion: allow enough time to find the room and arrive early. The university-wide four-week plan sits on the [Imperial interviews overview](/interviews/imperial-college-london); this page does not copy it, because the bottleneck here is the day itself rather than revision coverage.

The rest lives in rehearsal. If you need somebody who does not know you well to keep pushing, [how to run a mock interview](/interviews/guides/mock-interview) sets out how we structure those two hours; if the problem is that you start reciting the moment you open your mouth, begin with [thinking out loud](/interviews/guides/interview-thinking-aloud). To have someone place this day inside a four-week plan around your own calendar, [contact us](/contact) with your dates and target course.

## Questions
**Do I have to stay the whole applicant day?**

Yes. The course page says applicant days are held on Wednesdays between November and March, run from 10.30 to 15.30, and that you will be expected to attend the whole day. It publishes neither a half-day option nor a minute-by-minute schedule. If you have an immovable clash, raise it with the department through the details in your invitation rather than simply missing a segment.
**Does Materials Science and Engineering require the ESAT?**

No. The course page states that “this department does not use a test as part of its selection process”, and Imperial’s own list places Materials among the departments with no admissions test. The [ESAT page](/exams/esat) covers dates, modules and format for the departments that do use it. For this department, the applicant day is your only live segment.
**What does the 30 minute one-to-one ask?**

Imperial publishes two things: the format is a 30 minute one-to-one with one of its lecturers, and the department aims for it to be more of a conversation whose purpose is to see whether you suit the course, as much as for you to judge Imperial. What the questions are, how follow-ups work and whether specific subject content appears are all unpublished. The six practice prompts on this page are our own, written for this format.
**Is the group task marked separately, and can it fail you?**

The official description is only that it is an engineering-based problem-solving challenge used to see your team working skills, because the department treats teamwork as important to life at Imperial. No marking scheme, group size or weighting against the one-to-one is published, so any claim about what the task is worth, or how many it eliminates, is not official information. We treat it as a set of practisable behaviours: state an idea others can pick up, respond once they do, and propose a next step when nobody starts.
**Are international applicants invited to an applicant day too?**

The course page states one shortlist condition and does not separate applicants by nationality: if your UCAS application indicates that you are likely to satisfy its requirements, you will be invited to an applicant day. Two other points matter in practice. Overseas applicants normally need an ATAS certificate unless their nationality appears on the exemption list, and the subject code on the page is CAH10-03-02. And no invitation rate is published, nor any statement that overseas applicants attend in a different format, so treat your own invitation as the authority.
**Is it online or in person, and what should I wear?**

Imperial’s general position is that a shortlisted applicant may be offered a virtual or an in-person interview depending on circumstances and the course, notified by the department; what Materials schedules is an applicant day containing two talks, a group task and a student Q&A, so take the format from your own invitation. On clothing, the university states there is no formal dress code and you should wear whatever makes you feel comfortable.

## Official sources
- [Imperial College London: Materials Science and Engineering MEng course page](https://www.imperial.ac.uk/study/courses/undergraduate/materials-science-engineering-meng/)
- [Imperial College London: undergraduate interviews (usually November to February)](https://www.imperial.ac.uk/study/apply/undergraduate/process/interviews/)
- [Imperial College London: which departments use an admissions test](https://www.imperial.ac.uk/study/apply/undergraduate/process/admissions-tests/)
- [Imperial College London: ESAT dates, booking and format](https://www.imperial.ac.uk/study/apply/undergraduate/process/admissions-tests/esat/)
- [Imperial College London: application and admissions test dates for 2027 entry](https://www.imperial.ac.uk/study/apply/undergraduate/process/deadlines/)
- [Imperial College London: Biomedical Engineering (Bioengineering) course page](https://www.imperial.ac.uk/study/courses/undergraduate/2027/biomedical-engineering/)
- [University of Cambridge: how to prepare for your interview](https://www.undergraduate.study.cam.ac.uk/apply/after/interview-preparation)

## Related pages
- [Imperial interviews overview, department by department](https://www.frontiervue.com/interviews/imperial-college-london)
- [Interviews hub: Oxbridge and Imperial](https://www.frontiervue.com/interviews)
- [Materials science interview questions](https://www.frontiervue.com/interviews/questions/materials-science)
- [Biomedical engineering interview questions](https://www.frontiervue.com/interviews/questions/biomedical-engineering)
- [Engineering interview questions](https://www.frontiervue.com/interviews/questions/engineering)
- [Thinking out loud in an interview](https://www.frontiervue.com/interviews/guides/interview-thinking-aloud)
- [How to run a mock interview](https://www.frontiervue.com/interviews/guides/mock-interview)
