# Engineering interview questions: from everyday objects to forces and energy

> Five original engineering interview problems on structures, drag, bridge forces, energy and buoyancy, each with what it tests and how to reason aloud.

[Formatted version of this page](https://www.frontiervue.com/interviews/questions/engineering)

Engineering interviews often start with familiar objects: a bicycle, a bridge, a kettle, an ice cube. The question sounds simple, then the interviewer follows it down to forces, energy and materials. These five are **original practice**; the aim is not a memorised conclusion but a “why” someone else can follow.

## Key takeaways
- Simplify the real object into a free-body diagram before discussing detail.
- Every conclusion needs its conditions; the interviewer will change them.
- In an estimate, show the order of magnitude and the units, not just a number.

### Engineering interviews at a glance

| Item | Value |
| --- | --- |
| Format | Drawing, estimating, follow-ups |
| Question style | Everyday objects and structures |
| What matters | Forces, energy, orders of magnitude |
| How to prepare | State the conditions behind each conclusion |

> Order-of-magnitude estimates are welcome. Stating your assumptions clearly is better than a false answer to three decimal places.

> What the format looks like: You will usually be asked to draw. Start with a simplified free-body diagram or energy flow, then add real-world conditions. The interviewer keeps asking what happens if a parameter changes, so every conclusion needs its conditions of validity.

## Contents
1. What an engineering interview is testing
2. How to use these five problems

## 1. What an engineering interview is testing

An engineering interview is not a physics exam. The interviewer wants more than a formula: they want to see whether you can judge which effect dominates at this scale. A bridge spanning 10 metres and one spanning 100 metres are controlled by different forces.

That is why the questions start qualitatively: why does this happen? What if you double it? What if the material changes? Can you draw a diagram and mark the assumptions? Reducing a messy situation to a model you can calculate with is the heart of engineering thinking.

> Mark three things on every diagram: **the object, the forces, their directions**. If a force appears that you cannot explain, there is usually a gap in the understanding.

## 2. How to use these five problems

1. **Draw first**
Do not rush to equations. Draw the object, the boundary and the main forces, then say what you are ignoring.

2. **Estimate the magnitude** (Engineering habit)
Use familiar numbers (a person, a car, a room) to estimate a range and check whether the conclusion is plausible.

3. **Change one condition**
Double the size, the stiffness or the speed, and ask which assumption fails first.

4. **Close in one sentence**
“At this scale the dominant effect is …, therefore …” Let the interviewer hear the judgement.

## 5 Engineering interview problems

Every problem below is original practice written for this site, not a past paper. Read the question, try it aloud, then compare your reasoning with the approach.

### Question 1

**Prompt:** Why is a bicycle frame built from triangles? What would happen if you replaced the triangles with rectangles?

**What this tests：** This tests structural rigidity and trusses. The key idea: a pin-jointed triangle keeps its shape, while a quadrilateral becomes a mechanism.

**How to work through it：**
1. Once the three sides of a triangle are fixed, its angles are fixed too, so pin-jointed corners cannot rotate relative to one another.
2. A rectangle shears into a parallelogram unless you add a diagonal. The diagonal converts bending into tension or compression in the members, which uses the material far more efficiently.
3. A bicycle also carries the rider’s weight and pedalling forces. Triangles spread those loads across several thin tubes, which is why the frame can be light and stiff at the same time.

**The likely follow-up:** Why do some bicycles use a single-sided fork? What provides its stiffness?

### Question 2

**Prompt:** A small ball and a flat sheet of paper are released from the same height at the same time. What happens? Now crumple the paper into a ball and repeat. Explain the difference.

**What this tests：** This tests gravity, air resistance and terminal velocity. The interviewer wants to see you isolate the area-to-mass ratio.

**How to work through it：**
1. In a vacuum both accelerate at the same rate and land together. In air, drag depends on the frontal area and on the square of the speed.
2. The flat sheet has a large area and little mass, so it reaches terminal velocity quickly and falls slowly. Crumpling it sharply reduces the area and raises the terminal speed.
3. If the ball is very light, such as a ping-pong ball, drag may affect it too. The outcome depends on the area-to-mass ratio, not on the slogan that heavy things always fall faster.

**The likely follow-up:** What would happen if the experiment were repeated on the Moon?

### Question 3

**Prompt:** A bridge must span 100 metres. Compare a beam bridge with a suspension bridge: which internal forces dominate in each, and why does the span change the choice?

**What this tests：** This tests how bending moment grows with span, the division between tension and compression, and structural efficiency. The point is not to name bridge types but to understand the non-linearity introduced by span squared.

**How to work through it：**
1. For a simply supported beam under a uniform load, the maximum bending moment grows roughly with the square of the span. Double the span and the moment quadruples, so depth and self-weight rise sharply.
2. A suspension bridge carries the deck load through hangers to the main cable, which is in tension, while the towers are in compression. Tension is an efficient way to use cable material, which suits long spans.
3. A 100-metre span is moderate: a beam, arch or cable-stayed bridge may all work. The choice also depends on geology, navigation clearance, cost and maintenance, not mechanics alone.

**The likely follow-up:** Where does an arch bridge sit in this range, and which force dominates in it?

### Question 4

**Prompt:** You are designing an electric kettle. Where does the electrical energy go? How could you make it boil faster without increasing the power rating?

**What this tests：** This tests energy conservation, heat transfer and efficiency. The interviewer wants you to separate useful energy from losses and propose concrete improvements.

**How to work through it：**
1. The energy heats the water, the kettle body and the element; some is lost by convection and radiation from the walls and by steam.
2. Without raising the power, reduce the energy needed or the losses: boil less water, keep the lid on, insulate the walls, keep the element in good contact with the water and descale it.
3. Safety and lifetime matter too: at fixed power, a shorter boil may concentrate heat, so the design must keep the heat flux from becoming too high locally.

**The likely follow-up:** Why does a kettle switch itself off when the water boils?

### Question 5

**Prompt:** A cube of ice floats in a glass of water. When it melts, does the water level rise, fall or stay the same? Explain.

**What this tests：** This tests Archimedes’ principle and density. The answer is short; what matters is whether you can explain it through the weight of displaced water.

**How to work through it：**
1. The floating ice displaces a weight of water equal to its own weight. When it melts it becomes water of the same mass, occupying exactly the volume that was displaced.
2. So the level stays the same. The relevant volume is not the volume of the ice but the volume of water it displaces.
3. If a stone is frozen inside the ice, the level falls after melting, because the stone no longer displaces its own weight of water once it sinks.

**The likely follow-up:** Does the answer change if the glass contains salt water rather than fresh water?

## Questions
**Do I need to study mechanics of materials in advance?**

Not systematically. Knowing what tension, compression, bending moment and shear mean, and being able to explain common structures with a free-body diagram, is enough. The interview cares more about simplifying a situation into a model.
**What if an estimation question has no standard answer?**

Estimation questions do not have a unique answer. State your assumptions, check the order of magnitude, and say which assumption is most likely to be wrong. That is a good answer, and the interviewer will build on your assumptions.

## Official sources
- [University of Oxford: a guide to undergraduate interviews](https://www.ox.ac.uk/admissions/undergraduate/applying/guide-for-applicants/interviews)
- [University of Oxford: admissions timeline (decisions on 12 January 2027)](https://www.ox.ac.uk/admissions/undergraduate/applying/admissions-timeline)
- [University of Cambridge: interviews (main period 7 to 18 December 2026)](https://www.undergraduate.study.cam.ac.uk/apply/after/cambridge-interviews)
- [University of Cambridge: how to prepare for your interview](https://www.undergraduate.study.cam.ac.uk/apply/after/interview-preparation)

## Related pages
- [All subject interview questions](https://www.frontiervue.com/interviews/questions)
- [Physics interview questions](https://www.frontiervue.com/interviews/questions/physics)
- [Mathematics interview questions](https://www.frontiervue.com/interviews/questions/mathematics)
- [Oxford interviews](https://www.frontiervue.com/interviews/oxford)
- [Cambridge interviews](https://www.frontiervue.com/interviews/cambridge)
- [The ESAT exam guide](https://www.frontiervue.com/exams/esat)
