Skip to main content

Engineering interviews

Engineering interview questions: from everyday objects to forces and energy

7 sections958 words5 min read4 official sources

What the format looks like

You will usually be asked to draw. Start with a simplified free-body diagram or energy flow, then add real-world conditions. The interviewer keeps asking what happens if a parameter changes, so every conclusion needs its conditions of validity.

Reading zoom
Part 1

What an engineering interview is testing

An engineering interview is not a physics exam. The interviewer wants more than a formula: they want to see whether you can judge which effect dominates at this scale. A bridge spanning 10 metres and one spanning 100 metres are controlled by different forces.
That is why the questions start qualitatively: why does this happen? What if you double it? What if the material changes? Can you draw a diagram and mark the assumptions? Reducing a messy situation to a model you can calculate with is the heart of engineering thinking.
Mark three things on every diagram: the object, the forces, their directions. If a force appears that you cannot explain, there is usually a gap in the understanding.
Part 2

How to use these five problems

01

Draw first

Do not rush to equations. Draw the object, the boundary and the main forces, then say what you are ignoring.
02Engineering habit

Estimate the magnitude

Use familiar numbers (a person, a car, a room) to estimate a range and check whether the conclusion is plausible.
03

Change one condition

Double the size, the stiffness or the speed, and ask which assumption fails first.
04

Close in one sentence

“At this scale the dominant effect is …, therefore …” Let the interviewer hear the judgement.
Original practice

5 Engineering interview problems

Every problem below is original practice written for this site. Read the question, try it aloud, then compare your reasoning with the approach.

Why is a bicycle frame built from triangles? What would happen if you replaced the triangles with rectangles?
Frontier ACE mock practice3 steps
  1. What it tests
    This tests structural rigidity and trusses. The key idea: a pin-jointed triangle keeps its shape, while a quadrilateral becomes a mechanism.
  2. 1
    Step 1
    Once the three sides of a triangle are fixed, its angles are fixed too, so pin-jointed corners cannot rotate relative to one another.
A small ball and a flat sheet of paper are released from the same height at the same time. What happens? Now crumple the paper into a ball and repeat. Explain the difference.
Frontier ACE mock practice3 steps
  1. What it tests
    This tests gravity, air resistance and terminal velocity. The interviewer wants to see you isolate the area-to-mass ratio.
  2. 1
    Step 1
    In a vacuum both accelerate at the same rate and land together. In air, drag depends on the frontal area and on the square of the speed.
A bridge must span 100 metres. Compare a beam bridge with a suspension bridge: which internal forces dominate in each, and why does the span change the choice?
Frontier ACE mock practice3 steps
  1. What it tests
    This tests how bending moment grows with span, the division between tension and compression, and structural efficiency. The point is not to name bridge types but to understand the non-linearity introduced by span squared.
  2. 1
    Step 1
    For a simply supported beam under a uniform load, the maximum bending moment grows roughly with the square of the span. Double the span and the moment quadruples, so depth and self-weight rise sharply.
You are designing an electric kettle. Where does the electrical energy go? How could you make it boil faster without increasing the power rating?
Frontier ACE mock practice3 steps
  1. What it tests
    This tests energy conservation, heat transfer and efficiency. The interviewer wants you to separate useful energy from losses and propose concrete improvements.
  2. 1
    Step 1
    The energy heats the water, the kettle body and the element; some is lost by convection and radiation from the walls and by steam.
A cube of ice floats in a glass of water. When it melts, does the water level rise, fall or stay the same? Explain.
Frontier ACE mock practice3 steps
  1. What it tests
    This tests Archimedes’ principle and density. The answer is short; what matters is whether you can explain it through the weight of displaced water.
  2. 1
    Step 1
    The floating ice displaces a weight of water equal to its own weight. When it melts it becomes water of the same mass, occupying exactly the volume that was displaced.

Sister site

Practise saying the thinking out loud

Frontier ACE is Frontier Academy’s AI interview practice site for Oxford, Cambridge and Imperial applicants. It runs timed video-style practice and mock interviews, then scores each attempt on five dimensions. Use it to rehearse the conversation, then come back to the subject problems here.

Frontier ACE is a Frontier Academy site. Links open in a new tab and are tagged as referrals.

Sources

Official sources

4 official sources (click to view)
FAQ

Frequently asked questions

Do I need to study mechanics of materials in advance?
Not systematically. Knowing what tension, compression, bending moment and shear mean, and being able to explain common structures with a free-body diagram, is enough. The interview cares more about simplifying a situation into a model.
What if an estimation question has no standard answer?
Estimation questions do not have a unique answer. State your assumptions, check the order of magnitude, and say which assumption is most likely to be wrong. That is a good answer, and the interviewer will build on your assumptions.

UAT-UK, Pearson, OCR, the University of Cambridge, Imperial College London and other names and logos belong to their respective owners.

Next: Engineering interview practice

Work through all 5 problems aloud, then rehearse a full interview with FrontierACE. Both are built by Frontier Academy.