Skip to main content
The FrontierVUE Dispatch

Imperial Design Engineering · 2027 entry

Imperial Design Engineering: the ESAT opens the door, the interview decides

ESAT results for the October 2026 sitting were released on 16 November. For most of Imperial’s engineering departments, that score is the main filter between an application and an interview. The Dyson School of Design Engineering is different. Its offer-holders in 2025 entry had the lowest mean ESAT mark of any Imperial department that uses the test, and the candidates it interviewed but turned down scored higher, on average, than the ones it admitted. This article sets out what Imperial’s own figures show, what they imply for the personal statement and portfolio, and how to prepare for a 20-minute interview that, for overseas applicants, has been the decisive stage.
Two interviewers across a table from a nervous student
Illustration · AI-generated
By , Founder12 sections4,762 words24 min read8 official sources
I

Part 1 of 4

Sections 01 to 03

Part 1

Three official sources, and what each can tell you

Most claims about Imperial Design Engineering admissions, including the one that "the ESAT does not matter", are second-hand. Three official sources allow them to be checked.
The admissions workbook. Imperial publishes applications received, offers made and places confirmed for every undergraduate programme over the last five completed cycles, split by fee status, with separate sheets by gender and by primary nationality. It shows how competitive the course has been and how that has changed. It says nothing about test scores.
The ESAT dashboard. Imperial’s page Understanding your ESAT and TMUA scores links to an interactive dashboard for the 2025 entry cycle. For each department that uses the ESAT, it gives the share of candidates who received an offer, were interviewed but unsuccessful, or were unsuccessful without interview, with the mean test mark for each group. It is the only source that connects scores to outcomes for Design Engineering.
The Statistics Guide 2025–26. Imperial’s Planning and Insight Division publishes department-level applications by fee status, student numbers and degree results.
One cycle, three lenses. All three cover the October 2025 intake, which was the Dyson School’s first cycle with the ESAT. Their bases differ: the workbook counts every application, the dashboard only those who sat the test, and the Statistics Guide counts applications as at 31 October 2025 and enrolled students rather than confirmed places. We quote each figure with its source and do not combine them in one calculation.
Students discussing code on a big screen
Illustration · AI-generated
Part 2

Five cycles of Design Engineering admissions, 2021 to 2025

Design Engineering is a single programme, the four-year MEng, so the department total and the course total are the same.
Entry yearApplicationsOffersPlaces confirmedOffer rateApplications per place
20216091789929.2%6.2
20226211699927.2%6.3
202371517710224.8%7.0
202473117910624.5%6.9
2025 · first ESAT cycle
782
181
103
23.1%
7.6

Source: Imperial Undergraduate Admissions Statistics, sheet 1, Design Engineering (MEng 4YFT). Imperial’s 2027 course page rounds the 2025 figure to 7 : 1.

The pattern is steady rather than sudden. The number of offers has stayed at around 170 to 180 a year and the intake at about 100, while applications have grown by 28% in four years. Each cycle has been a little harder than the one before.

All of the growth has come from overseas, and so has all of the tightening

Fee status20212022202320242025
Home: offers / applications88 / 24884 / 24981 / 23993 / 23097 / 233
Home: offer rate35.5%33.7%33.9%40.4%41.6%
Overseas: offers / applications90 / 35885 / 37296 / 47686 / 50181 / 514
Overseas: offer rate25.1%22.8%20.2%17.2%
15.8%

Source: as above, Home and Overseas rows. EU fee status was withdrawn after 2020 and reappears in 2025 with 35 applications and suppressed offer counts, so it is not shown.

Home offer rateOverseas offer rateOffer rate (%), by entry year
2021 entry35.525.1
2022 entry33.722.8
2023 entry33.920.2
2024 entry40.417.2
2025 entry41.615.8

Imperial Undergraduate Admissions Statistics, sheet 1, Home and Overseas rows; offer rate is offers divided by applications, our calculation.

Home applications have been flat at about 240 a year, and the Home offer rate has risen. Overseas applications have grown from 358 to 514 while Overseas offers have drifted down from 90 to 81. The Overseas offer rate has fallen in every one of the last four cycles, from one in four to fewer than one in six.
The Statistics Guide confirms the shape of the pool. On its count, 69.0% of Design Engineering applicants for 2025–26 entry were Overseas, the second-highest share among Imperial’s engineering and physics departments that use the ESAT, after Electrical and Electronic Engineering (75.7%). (Life Sciences, which also uses the ESAT, is reported with its other programmes combined and is omitted.)
ESAT department, 2025–26 entryHomeOverseasOverseas shareNew admissionsApplications : admissions
Electrical and Electronic Engineering3911,22075.7%1809.0 : 1
Dyson School of Design Engineering
232
516
69.0%
99
7.6 : 1
Civil and Environmental Engineering16627862.6%1143.9 : 1
Chemical Engineering36352559.1%1685.3 : 1
Mechanical Engineering1,0491,49058.7%18313.9 : 1
Physics7991,02056.1%2607.0 : 1
Aeronautics81477548.8%14211.2 : 1

Source: Imperial College Statistics Guide 2025–26, "Applications and admissions: undergraduate". Overseas includes applicants whose fee status was pending at the first stage. Overseas share is our calculation.

The school is small. Its results are strong.

378

undergraduates in December 2025

24.6 : 1

student-to-academic-staff ratio, one of the highest in the Faculty of Engineering (Computing 24.7 : 1)

97.7%

of 86 degrees awarded in 2025 were Firsts or 2:1s, the highest proportion in the faculty; 40 were Firsts

Where the season is nowOfficial results days, October 2026 to February 2027
OctNovDecJanFebMarTMUA / ESAT / TARATMUA / ESAT / TARAtoday
  • TMUA / ESAT / TARA16 November 2026 · October 2026 sitting
  • TMUA / ESAT / TARA8 February 2027 · January 2027 sitting
Part 3

Applicants from China: four in ten applications, more than a third of the intake

20212022202320242025
China: applications144182250298
336
China: offers2647595356
China: places1532393237
China: offer rate18.1%25.8%23.6%17.8%
16.7%
United Kingdom: offer rate32.5%33.9%36.4%42.4%38.6%
Department total, this sheet600631725735761

Source: Imperial Undergraduate Admissions Statistics, sheet 4, Primary Nationality. This sheet’s department totals differ slightly from sheet 1 (761 against 782 applications in 2025), so the two are not mixed. Nationality is not fee status: a Chinese national educated in the UK may be classed as Home.

Three things stand out.
  • The pool has more than doubled. Applications from Chinese nationals rose from 144 to 336 in four years and made up 44% of all applications in 2025.
  • Chinese applicants are well represented in the intake. In 2025 they received a third of all offers (56 of 170 on this sheet) and took 37 of 98 places, or 38% of the class. Design Engineering is not a course that turns away applicants from China.
  • But the rate has come down as the pool has grown. The offer rate fell from a peak of 25.8% in 2022 to 16.7% in 2025. More applicants with similar profiles are competing for a roughly fixed number of offers, which makes whatever distinguishes one application from another (the statement, the projects, the interview) worth more each year.
II

Part 2 of 4

Sections 04 to 06

Part 4

What Imperial’s ESAT dashboard shows for Design Engineering

Outcomes by group

GroupOfferInterviewed, unsuccessfulUnsuccessful, not interviewedInterviewed in totalOffers among those interviewed
Home, non-WP34.7%5.9%59.4%40.6%85%
Home, WP90.7%2.3%7.0%93.0%98%
Overseas
15.7%
17.5%
66.8%
33.2%
47%
All24.5%13.8%61.8%38.3%64%

Source: Imperial, "ESAT scores: applicant outcomes - 2025 entry cycle", Design Engineering. WP: applicants flagged for widening participation (Home only). The last two columns are our calculations.

Mean ESAT mark by outcome (raw, maximum 27)

GroupOfferInterviewed, unsuccessfulNot interviewed
Overseas
11.1
11.9
7.7
Home, non-WP7.37.46.2
Home, WP7.07.34.0
All
8.9
11.4
7.3

Imperial does not say how the two module marks are combined. Since the maximum equals one module’s length (27 questions), the figure is best read as a per-module average.

The finding that matters most

Among the candidates Design Engineering interviewed, the ones it rejected had slightly higher ESAT marks than the ones it admitted. This holds overall (11.4 against 8.9) and within each group, including Overseas candidates (11.9 against 11.1). The dashboard’s box plot shows the same thing: the middle half of interviewed-but-unsuccessful candidates sat at roughly 9 to 14 marks, above the middle half of offer-holders at roughly 7 to 11 (read from the chart; approximate).
It would be wrong to conclude that a higher score hurts. The likelier reading is that the department sets a modest mathematical threshold for interview and then decides almost entirely on what it sees and hears: the statement, the work and the interview. A strong score does not carry a weak interview.

But the ESAT is not irrelevant

The same table shows that the shortlist does respond to the score. Overseas candidates who were not interviewed averaged 7.7, well below the 11 to 12 of those who were. For Overseas applicants, who make up most of the pool and were interviewed at a rate of one in three, the score is part of what gets an application read closely. The claim that "Design Engineering does not look at the ESAT" goes too far. The accurate version is that it asks for less than any other ESAT department, and then stops using it.

Design Engineering against the other ESAT departments

Department, 2025 entryOffer-holders’ mean (all)Overseas offer-holders’ mean
Aeronautics17.518.6
Physics17.519.4
Electrical and Electronic Engineering16.619.8
Mechanical Engineering15.816.8
Chemical Engineering14.215.4
Civil and Environmental Engineering12.613.0
Design Engineering
8.9
11.1

Source: Imperial ESAT dashboard, 2025 entry. Design Engineering candidates sit only Mathematics 1 and 2; most other departments add Physics or Chemistry, so the comparison is indicative rather than exact.

Offer-holders’ mean (all)Overseas offer-holders’ meanRaw ESAT mark, out of 27
Aeronautics17.518.6
Physics17.519.4
Electrical and Electronic Engineering16.619.8
Mechanical Engineering15.816.8
Chemical Engineering14.215.4
Civil and Environmental Engineering12.613.0
Design Engineering8.911.1

Source: Imperial ESAT dashboard, 2025 entry. Design Engineering candidates sit only Mathematics 1 and 2; most other departments add Physics or Chemistry, so the comparison is indicative rather than exact.

For overseas applicants, the two Imperial departments behave in opposite ways

In Electrical and Electronic Engineering, 82% of Overseas candidates were turned down without interview, and 89% of those interviewed received an offer: the shortlist is the hard part. In Design Engineering, a third of Overseas candidates were interviewed and fewer than half of those succeeded. The preparation that matters most is different as a result. For EEE, it is the score and the written application. For Design Engineering, it is the interview.
A lecturer writing equations on a chalkboard to a class
Illustration · AI-generated
Part 5

Reading your own score now

01

Record both modules.

Design Engineering reads Mathematics 1 and Mathematics 2 only. A Physics or Chemistry score taken for another course is not considered and does not count against you.
02

Convert before you compare.

Your UAT-UK result is a scaled score from 1.0 to 9.0; Imperial’s dashboard uses raw marks. Use the ESAT score converter to estimate correct answers per module.
03

Use the right column.

If you are applying from outside the UK, compare yourself with the Overseas figures: 11.1 for offer-holders and 7.7 for those not interviewed.
04

Then stop looking at the score.

If you are in or near the range of interviewed candidates, nothing further you do will change your ESAT, and everything you do in the next few weeks can change your interview.

Five misreadings we see after results day

01

Giving up because the score is low

Wrong
"My average is below 5, so there is no point preparing for Imperial."
Right
Offer-holders averaged 8.9 out of 27, the lowest of any Imperial ESAT department, and applicants have reported interviews with averages below 4.
Spot it:
A decision taken from the score alone, before any word from the department.
02

Believing the ESAT is ignored

Wrong
"Design Engineering doesn’t care about the ESAT."
Right
Overseas candidates who were not interviewed averaged 7.7, against 11 to 12 for those who were. The bar is low, not absent.
Spot it:
"Doesn’t matter" with no figure attached.
03

Expecting a high score to carry the interview

Wrong
"I scored well, so the interview is a formality."
Right
Interviewed-but-unsuccessful candidates averaged 11.4, above offer-holders’ 8.9. For Overseas candidates, fewer than half of interviews ended in an offer.
Spot it:
Treating the interview as a confirmation rather than the selection.
04

Treating the portfolio as a gallery

Wrong
"I’ll show my best-looking renders."
Right
You have two minutes. Show one piece of work and the decisions behind it. The school says sketching is taught in the first year, and AI-generated work shown without credit can lead to rejection.
Spot it:
A portfolio slide with no user, no constraint and no trade-off on it.
05

Reading silence as rejection

Wrong
"No invitation by December means I’m out."
Right
Interviews run from the beginning of November to mid-March, and applicants who sit the January ESAT are interviewed later. Most outcomes arrive after mid-March.
Spot it:
A conclusion drawn from timing alone.
Part 6

What applicants have reported

The Student Room has several threads on Design Engineering invitations and interviews. Posts are anonymous and unverified; we date each one and include it only where it is consistent with, or usefully qualifies, the official data.
CycleApplicant reportSource
2027 entryAn international applicant noticed that some candidates with high ESAT scores had not been interviewed, and asked how much the personal statement weighs. Replies disagreed on the ESAT, but agreed that the statement should go deep on one or two of the applicant’s own projects, including what went wrong.TSR · Nov 2026
2026 entryAn international applicant who scored "4 twice" in Mathematics 1 and 2 was invited to interview.TSR · 2025–26
2026 entryAn applicant averaging about 4.7 across Mathematics 1 and 2, predicted 45 IB points, was invited. Their statement focused on "self-led projects", linked to design theory and social impact, with "a lot of emphasis on iterative mindset".TSR · 2025–26
2026 entryAn interviewee advised: "don’t practice generic interview or personal questions, they are mostly knowledge and technical based."TSR · 2025–26
2026 entryA Home applicant who applied on 17 November was invited on 24 November, with 5.5 (Maths 1) and 6.0 (Maths 2).TSR · 2025–26
2026 entryAn applicant averaging 4.1 reported an interview; another with 4.0 and 2.8, after a Cambridge Design rejection, was unsure of their chances.TSR · 2025–26
2025 entryInterviewed with 5.6 (Maths 1) and 4.5 (Maths 2), predicted four A*s; "only got 5–6 days notice".TSR · 2024–25
2025 entryTwo applicants with ESAT averages "below 4" were interviewed, one in January and one on 26 February (predicted A*A*A and 45 IB respectively).TSR · 2024–25
2025 entryApplied 10 October, invited 19 November, interviewed 4 December, offer 12 December.TSR · 2024–25

The Student Room threads 7699220, 7698627, 7654477, 7641450 and 7569802, read 18 November 2026. Scores are as reported by posters and cannot be checked.

Three points recur, and each matches the dashboard. Applicants with averages between 4 and 5 are interviewed regularly. Notice is short, often under a week. And interviewees describe the questions as technical and specific rather than general, which is consistent with the school’s statement that the interview tests "design, technical, and mathematics skills".
III

Part 3 of 4

Sections 07 to 09

Part 7

The personal statement: what the school says it reads for

The Dyson School is unusually explicit about the statement. Its page 10 Do’s and Don’ts of Personal Statements and its admissions FAQ amount to a brief. In summary:

01

Lead with what you have made.

The school suggests completing the sentence "The thing I am most proud to have created is…" and putting it in the first paragraph, because it receives "upwards of 700 applications per year".

02

Go deep on one project rather than listing many.

Specific detail (which language, which material, which test) is preferred over general interest.

03

Show making, not only learning.

The course is "extremely hands-on". Prototypes from cardboard, robotics kits and self-taught coding all count; formal work experience is not expected.

04

Evidence creativity as well as technical skill.

The school asks applicants to tell it about "your web comics, your indie bands, your handbag designs", and what they learned.

05

Write about yourself, not your family.

And look beyond the school syllabus, which the admissions team already knows.

06

Failure is acceptable.

A project that went wrong is "a very valuable data point" if you can show what you learned from it.

What this means in practice

Taken together with the dashboard, the guidance points to one conclusion: the statement is where a Design Engineering application separates itself from 700 others with similar grades and similar scores. Three qualities are worth building it around.
A design problem you defined yourself. Not "I designed a lamp", but who it was for, what was wrong with what they had, and how you found out. Human-centred design begins with a person and a failure, not with an object.
Engineering decisions with reasons. Every material, mechanism or line of code in the project is a choice. Pick two and explain what you traded off: cost against durability, weight against stiffness, simplicity against capability.
Iteration. What did version one get wrong, how did you find out, and what changed in version two? One honest iteration says more about an engineering mindset than three finished products.
Mapping this onto the UCAS format. From 2026 entry, UCAS replaced the free-form statement with three questions: why you want to study the course, how your qualifications and studies have prepared you, and what else you have done outside education. For Design Engineering, the first answer should name the kind of problem you want to solve, the second should go beyond the curriculum, and the third is where your strongest self-directed project belongs, written in depth.
If Design Engineering is one of several different courses on your UCAS form, the school advises describing the skills and experience relevant to it without naming the course title. It does not accept a separate statement.
Part 8

The interview: what the school says

The Dyson School’s FAQ is specific about the format.
ItemWhat the school says
Who"Only the strongest applicants based on their UCAS applications and performance in the ESAT" are interviewed
WhenBeginning of November to mid-March; invitations by email with around a week’s notice
HowMicrosoft Teams, with one member of academic staff
LengthAbout 20 minutes
What it tests"Design, technical, and mathematics skills as well as your motivation for applying to Design Engineering"
PortfolioOptional; a maximum of two minutes; screen-sharing enabled, or hold work up to the camera
EquipmentPens or pencils and paper, to work out problems or illustrate ideas
AISuspected use of generative AI, including reading from a screen or showing AI-made work without credit, "may result in the rejection of your application"
DecisionsMost outcomes after mid-March; all by the end of March
The school also notes that it can only shortlist candidates once their ESAT score has arrived, so applicants who sit in January are likely to be interviewed late in the cycle. For applicants taking a gap year, it warns that maths skills "atrophy very quickly" and that they should "expect to be rigorously tested at interview".

How the 20 minutes tend to divide

01

Opening · motivation

Why Design Engineering rather than Mechanical Engineering, product design or architecture. Expect a follow-up on anything specific you say.
02

Two minutes · your work

One project, presented as a set of decisions. The interviewer will usually ask about the one decision you did not explain.
03

Core · design and technical reasoning

A product to analyse or a problem to solve, often with a quantitative step. Think aloud and sketch.
04

Mathematics

A-level material applied: optimisation, moments, rates of change, estimation. The FAQ is clear that this is tested.
Part 9

What the design part feels like: one worked example

Interviewers frequently ask candidates to name a product they admire. It is a fair question with a common failure: answering with what the product looks like rather than what problem it solves. The example below works through one answer. The analysis is our own.

Worked example · Frontier ACE

"Name a product you admire, and tell me why it is well engineered."
Candidate’s choice: a Dyson Supersonic hair dryer.
What it tests: whether you can move from appearance to user need to engineering mechanism, and whether you can name what the design gives up.
  1. 1

    Start from the user’s problem, not the product

    A conventional hair dryer is head-heavy and tiring to hold above shoulder height for several minutes; it can be slow; it can overheat hair; and its nozzle gets hot, so changing attachments is awkward. Name the four problems before you name any feature.
  2. 2

    Match each problem to an engineering decision

    User problemEngineering response
    Tiring to holdThe motor sits in the handle rather than the head, moving the centre of mass towards the grip
    Slow dryingA high-speed motor drives air through a ring, drawing in surrounding air to increase the flow
    Heat damageTemperature is measured continuously and the heater is regulated
    Hot attachmentsAttachments fix magnetically, so they can be swapped without gripping a hot nozzle
  3. 3

    Quantify one of them

    Take a simplified model, not Dyson’s own figures: a 0.2 kg motor-and-fan unit moves from the head, 12 cm from the wrist, to the handle, 3 cm from the wrist. The moment the wrist must resist from that unit falls from 0.2 × 9.8 × 0.12 ≈ 0.24 N m to 0.2 × 9.8 × 0.03 ≈ 0.06 N m, a factor of four. The total weight is unchanged; what changes is where it acts. That is the sentence an interviewer is waiting for.
  4. 4

    Name the trade-offs

    A small, very fast motor is expensive and produces a high-pitched sound; moving it into the handle constrains the handle’s size and the ducting. The product is also expensive to buy and to repair. Saying which of these you would accept, and for which user, is the engineering judgement.
Answer
Answer in one line: It is well engineered because each of its main features answers a specific discomfort of the user with a specific change to the physics of the device, and it pays for that in cost, noise and repairability.
The likely follow-up: If you were asked to make a version for half the price, which of the four features would you keep, and why?
The same structure works for your own portfolio. For the two minutes you are given, say what the object is, whose problem it solves, why that makes it human-centred, which engineering method you used, what you traded off, and what the next iteration would change. The school is not looking for the most attractive drawing; it is looking for the candidate who can explain each decision.
IV

Part 4 of 4

Sections 10 to 12

Part 10

Four practice questions, and what to revise

Talk each one through aloud before reading the steps.
Question 1 · Mathematics and design
A drinks can must hold 330 ml. What radius and height minimise the metal used? Real cans are taller and narrower than your answer. Why?
What it tests: calculus applied to a real constraint, and whether you check a mathematical optimum against the people and processes that use the object.
  • Step 1. Volume V = πr²h is fixed, so h = V / πr². Surface area A = 2πr² + 2πrh = 2πr² + 2V / r.
  • Step 2. dA/dr = 4πr − 2V / r² = 0 gives r³ = V / 2π, so h = 2r: the height equals the diameter.
  • Step 3. With V = 330 cm³, r ≈ 3.7 cm and h ≈ 7.5 cm. A real 330 ml can is about 6.6 cm across and 11.5 cm tall.
  • Step 4. The model assumes the walls and ends cost the same. In practice the ends are thicker and the necked top is formed separately, so it pays to make them smaller. A narrower can is also easier to hold in one hand and fits vending machines, packaging and production lines built around a standard diameter.
The likely follow-up: if the ends cost three times as much per unit area as the wall, what is the new optimum?
Question 2 · Human-centred design
Design a bicycle lock that a student will actually use every time. Talk me through how you decide what to build.
What it tests: whether you define the failure before the solution, and whether you treat the user’s behaviour as a design constraint rather than a flaw.
  • Step 1. Ask why locks go unused: too heavy to carry, slow to fit, nowhere to put them, or fitted badly. Say how you would find out, for example by watching thirty people lock bikes outside a library.
  • Step 2. Separate security (time to defeat) from usability (time to fit, weight, where it lives on the bike). A lock that is secure but left at home has a security of zero.
  • Step 3. Set measurable targets: fitted in under ten seconds, carried on the frame, under a given weight, and resistant to a hand tool for a stated time.
  • Step 4. State the trade-off you would accept, and test a cheap prototype with real users before refining the mechanism.
The likely follow-up: your users keep locking only the front wheel. Is that a user error or a design error?
Question 3 · Mechanics
Why is it easier to open a door by pushing near the handle than near the hinge? How much harder is it 10 cm from the hinge on an 80 cm door?
What it tests: moments, and whether you can turn a physical intuition into a number and then into a design rule.
  • Step 1. Turning effect = force × perpendicular distance from the pivot. The door’s resistance (closer spring, friction, inertia) requires a given moment.
  • Step 2. At 75 cm from the hinge, a force F produces 0.75F. At 10 cm, the same moment needs 7.5 times the force.
  • Step 3. This is why handles sit at the free edge, and why push plates on fire doors are wide.
  • Step 4. Extend it to accessibility: a door closer strong enough to shut reliably may be too hard for a wheelchair user to open. That is a regulated design constraint, not a detail.
The likely follow-up: if you could change only the hinge, how would you make the door easier to open without making it close less reliably?
Question 4 · Motivation and process
Tell me about something you made that did not work. What did you learn, and what would you change?
What it tests: the school writes that failure is "a very valuable data point". This question checks whether you can analyse a failure as an engineer rather than recount it as an anecdote.
  • Step 1. State what you expected and what happened instead, in one sentence each.
  • Step 2. Give the cause you identified and how you identified it: a test, a measurement, or a user who used it wrongly.
  • Step 3. Say what you changed and whether it worked. If you never fixed it, say what you would try first.
  • Step 4. Draw one general lesson about your process, not about the object: you now test earlier, or you now ask users before building.
The likely follow-up: if you had twice the budget and half the time, what would you have done differently from the start?

What to revise for the Imperial Design Engineering interview

AreaWhyTopics
01 · MathematicsAn A* in Maths is required, and the school says maths will be tested rigorouslyDifferentiation and optimisation · trigonometry · exponentials · estimation and units
02 · MechanicsMost design questions reduce to forces, moments and energyMoments and equilibrium · friction · energy and power · stress, stiffness and materials
03 · Design thinkingInterviews test design reasoning, not tasteUsers and needs · constraints · trade-offs · iteration and testing · sustainability
04 · Your portfolioTwo minutes, then follow-up questionsOne project · each decision and its reason · what failed · the next iteration
05 · Products"A product you admire" and "a product that annoys you" are common promptsTwo products you can analyse in depth, with numbers where possible
Part 11

Timeline: from results day to a decision, 2026–27

2026 – 2027Timeline
Nov 26
Dec 26
Jan 27
Feb 27
Mar 27
Apr 27
October ESAT results
16 Nov
16 Nov 2026 · October ESAT results released in UAT-UK accounts and sent to Imperial
Design Engineering interviews
Nov 2026 – mid-Mar 2027 · Design Engineering interviews on Microsoft Teams, with around a week’s notice
January ESAT booking closes
21 Dec
21 Dec 2026, 18:00 UK · January ESAT booking closes
January ESAT sitting
4–8 Jan 2027 · January ESAT sitting (6 January for mainland China, Hong Kong and Macau)
UCAS deadline
13 Jan
13 Jan 2027, 18:00 UK · UCAS deadline for Design Engineering
January ESAT results
8 Feb
8 Feb 2027 · January ESAT results; shortlisting for these candidates follows
Interviews conclude
Mid-March
Mid-March 2027 · Interviews conclude; most outcomes are released
Final decisions
31 Mar
31 Mar 2027 · All applicants receive a final decision
Hard deadline Event Window
Part 12

Checklist: the week before your interview

With around a week’s notice, the order matters.
  • Choose one portfolio project and rehearse a two-minute account: what it is, who it is for, why it is human-centred, how it works, what you traded off, and what the next version changes.
  • Prepare two products to analyse in depth: one you admire and one that frustrates you.
  • Reread your personal statement and be ready for a follow-up on every project it mentions.
  • Work through the four questions above aloud, with someone interrupting at least once per question.
  • Revise optimisation, moments and estimation until you can do them without notes.
  • Set up Microsoft Teams, screen-sharing and a camera at eye level; have paper and pens ready for sketching.
  • Make sure everything you show is your own work, and credit any tool you used.
  • Convert the interview time to your time zone and write down both.
For a structured mock interview with follow-up questions, see the Imperial interview guide or the Frontier ACE mock interview.

Sister site

Practise saying the thinking out loud

Frontier ACE is Frontier Academy’s AI interview practice site for Oxford, Cambridge and Imperial applicants. It runs timed video-style practice and mock interviews, then scores each attempt on five dimensions. Use it to rehearse the conversation, then come back to the subject problems here.

Frontier ACE is a Frontier Academy site. Links open in a new tab and are tagged as referrals.

Sources

Official sources

8 official sources (click to view)
Applicant reports in Part 6 are from public threads on The Student Room and are not official. Percentages marked as our calculation are derived from the figures above. Imperial states that its score data is historic and should not be taken as indicative of requirements for current or future cycles. The product analysis in Part 9 is our own and is not endorsed by Dyson or by Imperial College London.
FAQ

Frequently asked questions

What ESAT score do you need for Imperial Design Engineering?
Imperial publishes no cut-off. Its dashboard for 2025 entry gives a mean raw mark of 8.9 out of 27 among Design Engineering offer-holders, and 11.1 among Overseas offer-holders, the lowest of any Imperial department that uses the ESAT. Candidates who were interviewed but unsuccessful averaged 11.4, so a higher score does not secure an offer once you reach interview.
Does Imperial Design Engineering look at the ESAT at all?
Yes, for the interview shortlist. Overseas candidates who were not interviewed in 2025 entry averaged 7.7, against 11.1 to 11.9 for those who were. Only Mathematics 1 and 2 are considered.
Can you get an Imperial Design Engineering interview with a low ESAT score?
Applicants have reported interviews with averages of around 4 to 5, and in some cases below 4. These reports are unverified, but they are consistent with the low offer-holder mean in Imperial’s own data.
How important is the personal statement for Imperial Design Engineering?
More important than for most engineering courses. The school publishes its own guidance, asking applicants to lead with what they are proudest to have created, to go into depth on one project, and to show both technical and creative work. With modest ESAT expectations, the statement and portfolio are what distinguish applicants.
How long is the Imperial Design Engineering interview, and is there a portfolio?
About 20 minutes on Microsoft Teams, with one academic. A portfolio is optional; up to two minutes are allotted for it, with screen-sharing available. The interview tests design, technical and mathematical skills, and motivation.
What is the offer rate for international applicants to Imperial Design Engineering?
On Imperial’s admissions workbook, the Overseas offer rate was 15.8% in 2025 entry (81 offers from 514 applications), down from 25.1% in 2021. Applicants with Chinese nationality had an offer rate of 16.7% and took 37 of the 98 places recorded on the nationality sheet.
When are Imperial Design Engineering interviews and decisions?
Interviews run from the beginning of November to mid-March, with around a week’s notice. Most outcomes are released after mid-March, and all applicants receive a decision by the end of March.

UAT-UK, Pearson, OCR, the University of Cambridge, Imperial College London and other names and logos belong to their respective owners.

Turn reading into practice

Timed exam-style practice with worked solutions, and original interview questions with what each one tests.