Imperial Materials
Imperial Materials: one whole day, two ways of being assessed
Frontier ACE
The Imperial Materials interview bank
- Imperial Materials interview questions
- 40+
- Imperial Materials interview questions
- of real interview questions covered
- 90%+
- of real interview questions covered
- mock interviews with follow-ups
- 1v1
- mock interviews with follow-ups
- scoring dimensions after each answer
- 5
- scoring dimensions after each answer

Part 1 of 3
Sections 01 to 03
The day, on the calendar and in the room
Invitations as files are readUsually November to February
Applicant daysWednesdays, November to March
Equal-consideration deadline13 January, 18.00
Two talks, first
One-to-one interview
Group task
Student ambassador Q&A
Thirty minutes and forty-five: two different ways of being watched
| One-to-one, 30 minutes | Group task, 45 minutes | |
|---|---|---|
| What is being observed | How one mind pushes an idea forward | Whether a group can push it forward together |
| Who holds the topic | The lecturer follows your answer | Whoever speaks, or nobody |
| How silence reads | Thinking before speaking is fine | Long silence looks like non-participation |
| What to rehearse | Speak an unfamiliar problem aloud and let someone interject | Two or three people, timed: take a turn, hand one over, wrap up |
| The usual failure | A memorised monologue that never hears the follow-up | Treating it as a solo solving display |
This table is our own practice framework built from two sentences on the course page: the one-to-one aims to be more of a conversation, and the group task exists to see your team working skills. Imperial publishes no relative weighting, no marking scheme and no group size.
A department with no test, so speech is the evidence
Part 2 of 3
Sections 04 to 06
The 30 minute one-to-one: rehearsing a conversation
1. Turn motivation into an open question
2. Rehearse being interrupted, not finishing
3. Bring three kinds of material: syllabus, extra, unknown
4. Keep two real questions for the end
- “Why Materials Science and Engineering rather than chemical engineering or physics?”
- “Your statement mentions a project you did. Which judgement in it now looks wrong to you?”
- “Given a rubber tube and a copper tube, what simple experiment compares how they behave under repeated bending?”
- “Why is a phone case usually polymer rather than metal? Name one cost of switching it to metal.”
- “Explain why salt dissolves in water. Where would you start, and which step are you actually unsure of?”
- “Has a story about materials made you stop recently? Tell us the part you did not understand.”
The group task: the two hardest situations
Speaking only when named
Contradicting without replacing
No landing when the clock ends
Five hours: energy, pacing, and where questions come from
Three kinds of question worth asking
Not on the website, answerable that day
What a real week costsWhich week is heaviest, and in what
- How people handle the weekend a lab report eats
- Which course is hardest, and in which sense
First-year hands-on workWho does it, in groups of how many, and whether it counts
- Anything you made yourself, or procedure only
Switching direction in practiceWhich modules get retaken after a move
- Whether anyone around you actually did it
Tap a branch to unfold
Part 3 of 3
Sections 07 to 07
The numbers for the form, and what to carry into the day
A-level minimum
AAA: A in maths, A in chemistry or physics, A in a third subject
UCAS codes
Course JFM2, institution I50
Deadline
13 January 2027, 18.00 UK time
The UCAS cut-off for non-medicine courses
2027 home fee
GBP 10,050
A government-set cap, announced in November 2025
ATAS
Needed by some international applicants, code CAH10-03-02
Whether it applies is decided by the official rules
Applicant day
Wednesdays between November and March, 10.30 to 15.30
Attendance is expected the whole day
What to revise for Imperial Materials
Our recommended revision list, built from the admissions-test syllabus and the kinds of problems interviews use.
Mechanical properties
Choosing and comparing materials is the most common question type.
- Stiffness, strength, toughness and hardness
- Brittle fracture versus plastic deformation
- Specific strength and stiffness
Structure and bonding
“Why does this material behave like that?” goes back to atoms and microstructure.
- Metallic, ionic and covalent bonding
- Crystals and defects (dislocations)
- Polymer chains and cross-linking
- How composites work
Thermal and electrical
Thermal shock, expansion and conduction come up again and again.
- Thermal expansion
- Conductivity and thermal shock
- Conductors, semiconductors and insulators
Sustainability and manufacture
Imperial’s department cares about the whole life cycle of a material.
- Why recycling is hard
- Life-cycle thinking
- Common processing routes
Estimation and teamwork
The applicant-day group task and estimation questions test reasoning and teamwork.
- Order-of-magnitude estimates
- Moving a group discussion forward
4 practice questions for this course
Exclusive questions in the style of this interview. Talk each one through out loud first, then open the hints one at a time.
- What it testsThermal expansion and a clean estimate: choose sensible numbers, then judge whether the answer matters.
- 1Step 1Heated atoms vibrate more and sit further apart on average: thermal expansion, ΔL = αLΔT.
- What it testsThis tests the chain from structure to properties: expansion, the temperature gradient conduction creates, and the fact that ceramics are weak in tension with almost no plasticity. The interviewer is listening for where the stress comes from and why the material cannot shed it by deforming, not for the word “brittle”.
- 1Step 1Start with the inside heating first: the inner wall wants to expand, the cold outer wall refuses, so the inside goes into compression and the outside into tension. Saying which surface is loaded which way shows the thinking better than any formula.
- What it testsThis tests your first move with data: do you ask which quantity the task is minimising. On a frame, weight sets the cost of accelerating and climbing, so the numbers to compute are stiffness per unit mass and strength per unit mass, not simply the largest modulus. The interviewer is also listening for whether you do the division out loud and whether you name the columns missing from the table.
- 1Step 1Write the objective as two or three ranked lines: it must not flex under load (stiffness), it must survive a crash (strength and toughness), and it must be light (density). Say which one you put first, because every later step hangs on that.
- What it testsThe course wants Chemistry or Physics alongside Maths, so boundary questions like this appear. It tests whether one model can explain two families: in one, heating changes how often carriers are scattered; in the other, it changes how many carriers there are. The interviewer is also listening for whether you say honestly which part you have not been taught.
- 1Step 1Finish the metal first: plenty of free electrons, and heating makes the positive ions vibrate harder, so electrons are scattered more often, the mean free path shortens and resistance rises. No formula needed; the picture has to be clear.
The two weeks before your interview
0 of 7 done
Progress is saved in this browser only.
More questions by subject
10 original problems
5 original problems
5 original problems
5 original problems
5 original problems
5 original problems
5 original problems
5 original problems
5 original problems
6 original problems
6 original problems
8 original problems
More interview guides
Imperial
Oxford
Cambridge
drag the windows
Practise this question on Frontier ACE
A timed preview: read the question, think for a few seconds, then answer aloud. Frontier ACE scores the attempt on five dimensions.
Open the sample questionSister site
Practise saying the thinking out loud
Frontier ACE is Frontier Academy’s AI interview practice site for Oxford, Cambridge and Imperial applicants. It runs timed video-style practice and mock interviews, then scores each attempt on five dimensions. Use it to rehearse the conversation, then come back to the subject problems here.
Frontier ACE is a Frontier Academy site. Links open in a new tab and are tagged as referrals.
Official sources
7 official sources (click to view)
- Imperial College London: Materials Science and Engineering MEng course page
- Imperial College London: undergraduate interviews (usually November to February)
- Imperial College London: which departments use an admissions test
- Imperial College London: ESAT dates, booking and format
- Imperial College London: application and admissions test dates for 2027 entry
- Imperial College London: Biomedical Engineering (Bioengineering) course page
- University of Cambridge: how to prepare for your interview
Frequently asked questions
Do I have to stay the whole applicant day?
Does Materials Science and Engineering require the ESAT?
What does the 30 minute one-to-one ask?
Is the group task marked separately, and can it fail you?
Are international applicants invited to an applicant day too?
Is it online or in person, and what should I wear?
UAT-UK, Pearson, OCR, the University of Cambridge, Imperial College London and other names and logos belong to their respective owners.
Prepare for Imperial Materials Science and Engineering interview in four weeks
Work through the original subject questions, then rehearse the conversation with FrontierACE. Both are built by Frontier Academy.